XMODEL OUTRUN XM-03, 172 cm C cup love doll — gallery frame 1 of 6
XMODEL OUTRUN XM-03, 172 cm C cup love doll — gallery frame 2 of 6
XMODEL OUTRUN XM-03, 172 cm C cup love doll — gallery frame 3 of 6
XMODEL OUTRUN XM-03, 172 cm C cup love doll — gallery frame 4 of 6
XMODEL OUTRUN XM-03, 172 cm C cup love doll — gallery frame 5 of 6
XMODEL OUTRUN XM-03, 172 cm C cup love doll — gallery frame 6 of 6
CHROME tier

XM-03

OUTRUN

XM-03 / CHROME / 172 cm / C cup

$8,900

The long road model. Engineered to pose, stand and cross a room, with every motor in the catalogue fitted as standard.

Signature detail Full ORBIT leg system with the voice command set — say it and she moves.

Request a build slot
Height172 cm5 ft 8 in
CupC
Net weight41.6 kg91.7 lb
MaterialPlatinum silicone
Motion packages7
Shipped weight58.4 kg128.7 lb

Specification

Every number we publish

Measured on the finished body, not on a pattern. Circumference rows are the fullest point; channel depths are usable depth. Switch units for the whole table.

Units
Dimensions
Height172 cm5 ft 8 in (67.7 in)
Height, decimal feet (catalogue)5.64 ft
Full bust89 cm35.0 in
Under-bust72 cm28.3 in
CupC
Waist59 cm23.2 in
Hip96 cm37.8 in
Shoulder width40 cm15.7 in
Neck12 cm4.7 in
Torso64 cm25.2 in
Arm72 cm28.3 in
Leg85 cm33.5 in
Thigh53 cm20.9 in
Calf33.5 cm13.2 in
Foot23 cm9.1 in
Head circumference56 cm22.0 in
Weights
Net weight41.6 kg91.7 lb
Net weight, pounds (catalogue)91.7
Billing weight50.1 kg110.5 lb
Motion systems add16.8 kg37.0 lb
Material and finish
MaterialFull platinum silicone over a gel core, hand-airbrushed
HeadPlatinum silicone, ROS-class mouth with driven jaw
Skeleton and articulation
SkeletonSPINE-32 — 32-point stainless steel and glass-filled nylon skeleton: double-gear knees, shrug shoulders, articulated fingers, swivel ankles, standing feet with bolt plates, and a sway-pivot neck adaptor.
Channels
Oral depth16 cm6.3 in
Vaginal depth18 cm7.1 in
Anal depth15 cm5.9 in
Shipping
Package size178 x 44 x 34 cm70.1 x 17.3 x 13.4 in
Shipped weight58.4 kg128.7 lb
Shipped weight, pounds (catalogue)128.7
StandingYes - standing feet with bolt plates

Measurements

Where every number is taken

XMODEL OUTRUN XM-03 dimension diagram: front and side elevation with height, bust, under-bust, waist, hip, shoulder, arm, leg, thigh, calf, foot, neck, head and channel depths in centimetres and inches
Measurement points. Height is crown to floor with the feet flat and the bolt plates seated. Bust, under-bust, waist and hip are circumferences at the fullest point of each. Shoulder is a straight-line width across the top of the arm sockets. Arm runs shoulder to wrist tip; leg runs hip socket to floor. Channel depth is usable depth, measured with the insert removed. Package size is the outer carton. All values in centimetres, inches in brackets.

Movement

7 packages fitted to this body

Motion is internal design, not an add-on. Motors return to neutral when idle and every joint still poses by hand, so the body behaves like a standard articulated skeleton when the power is off. Fitted systems add 16.8 kg (37.0 lb) to the net weight above.

Standard from SIGNAL up

PULSE — Thermal core

Three-zone body heating to 37 C, reaches temperature in about 25 minutes.

Three independently controlled heating zones (chest, pelvis, thighs) hold the body at a skin-surface 36-37 C. Silent, 24 V, auto cut-off at temperature with a 4 hour safety timer.

Adds 1.2 kg (2.6 lb) to the body

Standard from SIGNATURE up

DRIFT — Hip + waist motion

Motor-driven waist twist and hip motion, three speeds, app or hand control.

A geared actuator inside the pelvis drives waist twist and hip motion through a smooth, quiet arc. Three speeds plus a slow-random mode. The doll still poses by hand; the motor returns to neutral and locks the joint when idle.

Adds 5.8 kg (12.8 lb) to the body

Standard on CHROME

ORBIT — Six-motor leg articulation

Voice-controlled leg motors: lift, spread, bend, and hold any pose you set by hand.

Four motors at the hips and two at the knees drive each leg independently. Command library covers lift, spread, bend and a full straddle; 'hold steady' locks whatever position you arranged by hand. Power off returns every joint to zero-torque so the body moves like a standard skeleton. English and Spanish command sets built in.

Adds 5.7 kg (12.6 lb) to the body

Standard from SIGNATURE up

VELVET — Oral motion + suction + heating

Movable jaw on a motor, internal suction and oral heating.

A silicone oral structure on a driven jaw, with internal suction and a heated liner. Independent of the body heating circuit so it can run on its own.

Adds 1.4 kg (3.1 lb) to the body

Standard from SIGNATURE up

ECHO — Voice + companion memory

On-board voice module with companion memory. No subscription, no account.

A voice module talking to a companion model that remembers your preferences and keeps a running history of your sessions. Touch-sensitive response plus voice commands for the motion systems. Runs offline from the doll; the phone app only handles favourites and firmware. No subscription fee, ever.

Adds 0.4 kg (0.9 lb) to the body

Standard on CHROME

BREATH — Breathing simulator

Chest rise and fall on a slow cycle, in sync with the ECHO voice.

A low-noise pump cycles the chest volume so the body breathes while it is still. Speeds with arousal state when ECHO is fitted.

Adds 0.7 kg (1.5 lb) to the body

Standard from SIGNAL up

SHIMMER — Gel-filled motion

Gel-filled chest and glutes that move with the body.

Gel-weighted pockets fill the chest and glutes so they carry momentum instead of holding a fixed shape. Standard on every CHROME tier body.

Adds 1.6 kg (3.5 lb) to the body

Finish and options

Finish is settled with us, after you inquire

The body you are looking at is painted for its own batch. Pick what suits and it lands in your inquiry; we confirm pigment, hair and eye stock before the paint room books your slot. Options carry no price here because nothing is charged here.

Loading the option set for this body…

In the crate

What arrives with OUTRUN

  1. Doll body and fitted head (assembled and bench-tested)
  2. Second face: eyes, lashes and brow set pre-installed
  3. Two wigs plus one interchangeable hair set
  4. Cleaning syringe, drying sticks, powder kit
  5. Heating and charging controller with 24 V supply
  6. Padded storage duffel, cotton body sheet, sleep mask
  7. Rigid flight case with corner castors and a lift-sling strap
  8. Signed airbrush card naming the finisher and the paint batch
  9. Owner's manual with a torque and cleaning schedule
  10. Two-year structural warranty card

Timing and cover

Lead time, warranty, delivery

Lead time

About 4 weeks in the paint room, then 2-3 weeks shipping

Booked when your slot is confirmed

Warranty

Two years on the skeleton, joints and all motion systems. One year on silicone and paint delamination. Motion motors rated for 800 hours of use.

  • Plain outer carton. Nothing on the outside says what is inside.
  • No branding on the packaging. No logos, no product names, no label text.
  • No product naming on the paperwork. Customs and courier documents carry a neutral description.
  • Signature on delivery. Someone in the household signs for it; nothing is left on a step.

Questions

OUTRUN, answered from the spec sheet

Why 172 cm, and what does that mean in a room?

OUTRUN stands 172 cm, which is 5 ft 8 in. That puts the shoulder line at roughly 142 cm off the floor and the hip at 85 cm, so the body sits in ordinary furniture rather than towering over it. The line runs from 145 cm (AFTER HOURS, 4 ft 9 in) to 175 cm (MIDNIGHT RUN, 5 ft 9 in), so this is the tall end of it.

How heavy is it to move, and does the weight match the size?

Net weight on this body is 41.6 kg (91.7 lb), against 172 cm (5 ft 8 in) of height, so it is a dense build for its size. The motion systems add 16.8 kg (37.0 lb), which is the number you feel when you lift it. Billing weight is 50.1 kg and the shipped figure is 58.4 kg (128.7 lb). Two people for stairs; the flight case ships with a lift-sling strap and castors, so moving it across a floor does not mean carrying it.

Silicone or TPE at CHROME tier?

OUTRUN is built in full platinum silicone over a gel core, hand-airbrushed. The head is platinum silicone, ROS-class mouth with driven jaw. Platinum silicone holds layered airbrush work and fine paint detail better than TPE, and it does not need the re-powdering that a TPE skin does. TPE bodies in the line are different bodies: SYNTHWAVE, LASER LUXE, VAPORLINE, AFTER HOURS.

Which motion packages suit this body?

This body is fitted with PULSE, DRIFT, ORBIT, VELVET, ECHO, BREATH, SHIMMER. That is 7 packages and 16.8 kg (37.0 lb) of added systems. With the full set, budget the armspan plus room to swing the legs when ORBIT runs. The motors return to neutral when the body is idle and every joint still poses by hand, so the extra weight is the only thing you notice when nothing is running.

Cleaning and storage in a small space?

The outer carton is 178 x 44 x 34 cm, and the body packs back into the padded storage duffel that ships in the crate, so a cupboard or a wardrobe base is enough. The kit covers it: cleaning syringe, drying sticks and powder kit for the channels, a cotton body sheet and sleep mask for surface dust, and the rigid flight case if you move it often. Air-dry fully before powdering and store flat rather than propped.

More on materials, motion, delivery and care in the buyer's guide.

Inquire

Request a build slot for OUTRUN

Inquire only. Nothing is charged on this site. We reply to build-slot requests in the order they arrive, usually within two working days.

Inquire only — nothing is charged. If the form fails, email [email protected].

Request received. We reply to build-slot requests in order, usually within two working days. Check your junk folder.